Product · Pre-engineered steel buildings

Pre-engineered buildings (PEB)

Steel buildings designed, fabricated and erected as one system: large clear spans, fast construction and easy expansion for warehouses, factories, cold stores and commercial sheds.

Overview

What is a pre-engineered building?

A pre-engineered building is a steel structure whose frames, purlins, girts and cladding are designed as one system, fabricated in a factory to exact sizes, and bolted together on site.

Built faster, built to fit. Because members are designed for the actual loads and made off-site, a PEB usually goes up much faster than a conventional structure and uses steel efficiently.

Our architects and structural engineers handle the layout, approvals, foundation design and civil works, so the steel arrives to foundations that are ready for it.

Range

What we build

01

Warehouses and logistics sheds

Large clear spans for racking, docks and vehicle movement.

02

Factories and workshops

Production halls with crane runways and mezzanines.

03

Cold storage and agri sheds

Insulated panels and controlled environments.

04

Showrooms and commercial

Wide frontages and clean interiors.

05

Multi-span buildings

Very large floor areas with interior columns.

06

Canopies and sheds

Parking, loading bays and covered yards.

System

Components of a PEB

Primary frame

Built-up tapered columns and rafters that carry the main loads.

Secondary members

Z and C purlins and girts that support the roof and wall sheeting.

Roof and wall cladding

Colour-coated or galvalume sheets, with insulation if needed.

Bracing

Rod or angle bracing for wind and stability.

Accessories

Gutters, downpipes, skylights, ventilators, louvres and doors.

Foundations

Anchor bolts and footings designed and built by our civil team.

Compare

PEB vs conventional construction

Pre-engineered building
  • Members designed for actual loads, so steel is used efficiently
  • Factory fabrication, fast bolted erection
  • Large column-free spans
  • Easy to extend later
  • Predictable cost and schedule
Conventional RCC / steel
  • Heavier sections, often over-designed
  • More work and curing on site
  • Spans limited without heavy beams
  • Extensions are harder
  • More exposure to site delays
Specifications

Typical specifications

Every PEB is designed for its site, loads and use. Final sizes are confirmed in the design. [Replace placeholders with your standard product data.]

Clear span
[Typical / maximum span you offer]
Eave height
[Typical range]
Bay spacing
[Typical bay spacing]
Roof slope
[Typical slope]
Cladding
Colour-coated or galvalume sheets; insulated panels on request
Design standards
Indian Standards such as IS 800 and IS 875
Crane capacity
[If offered]
Mezzanine
On request
Process

From brief to building

Design, approvals, civil works, fabrication and erection, from one team.

  1. 01

    Brief and site visit

    Use, size, loads and site conditions understood.

  2. 02

    Design and quote

    Layout, structural design and a written quotation.

  3. 03

    Foundations

    Our civil team builds footings and sets anchor bolts.

  4. 04

    Fabrication

    Frames and members fabricated and finished.

  5. 05

    Erection and handover

    Bolted erection, cladding, accessories and handover.

FAQ

PEB questions

What is a pre-engineered building?+

A steel building whose frames, purlins and cladding are designed as one system, fabricated in a factory and bolted together on site.

How long does a PEB take?+

It depends on size, design approvals and foundation work. Because members are made off-site and bolted together, erection is usually much faster than conventional construction. We confirm a schedule with the quote.

Can a PEB be extended later?+

Yes. PEBs can be designed so that bays can be added later with minimal disruption.

Do you also build the foundations?+

Yes. Our structural engineers design the foundations and our civil team builds them, so the steel arrives to foundations that are ready for it.

Can you add cranes and mezzanines?+

Yes. Crane runways, mezzanine floors, insulation, skylights and ventilators can be built into the design.

Enquiry

Get a PEB quote

Share the size, use and location. We will reply with next steps and a site visit within [X] working days.

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Pre-engineered buildings · design, supply and erection
Request a quote
Start a project →Request a valuation →Start a project →Request a valuation →
A principal replies within 4 working hours.
+91 93115 98688 · Call or WhatsApp