Design and build

How a precast compound wall is installed

Step by step from site marking to the finished wall, how long it takes, and what to check before work starts.

A precast compound wall is made of reinforced concrete posts and panels cast in a factory. On site, the posts are set in concrete footings at fixed spacing and the panels slide into grooves in the posts, so the wall goes up quickly with no plastering or curing of the wall itself.

The steps

  1. Survey and marking: the boundary is checked against the title documents and marked, and post positions are set out at the panel spacing.
  2. Pits and footings: pits are dug for each post, sized for the wall height and the soil.
  3. Setting the posts: posts are placed, aligned and plumbed, then concreted into the pits.
  4. Fixing the panels: once the footings have gained strength, panels are lowered into the post grooves one above another to the full height.
  5. Finishing: gates, coping or barbed wire are fitted and the wall can be painted.

Before work starts

  • Confirm the boundary to avoid disputes with neighbours.
  • Check access for the delivery truck and lifting equipment.
  • Tell the installer about slopes, drains and soft or filled ground.
  • Decide the height, and the position and width of gates.

Why it is faster than brick

Posts and panels are made and cured in the factory, so site work is mostly digging, setting and fixing. A brick wall needs a full foundation, masonry, plaster and curing on site.

← All insights
Start a project →Request a valuation →Start a project →Request a valuation →
A principal replies within 4 working hours.
+91 93115 98688 · Call or WhatsApp